Home Page Beez5
| บริษัท อินซ์เทค เมโทรโลจิคอล เซ็นเตอร์ จำกัด |
| Calibration laboratory |
|
|
| Accreditation ISO/IEC 17025 : 2017 |
    |
|
Section calibration laboratory Click ในแต่ละด้านเพื่อดูบริการในแต่ละ Lab |
| |
|
ทางบริษัทฯ ได้การรับรอง Accreditation ISO/IEC 17025 : 2017 ทั้งแบบ In-house และ On-site |
|
|
|
|
Certificate of Accredited by TISI (Thailand)  |
Price list calibration |
|
| รายชื่อเครื่องมือที่ได้รับการรับรอง Accreditation ISO/IEC 17025 : 2017 (ILAC) | ||||||||||||
|
|
ประวัติการรับรองห้องปฏิบัติการสอบเทียบของทางบริษัทฯ |
ระยอง, ชลบุรี, ราคา, เครื่องวัด, ความแข็ง, แสง, สี, เสียง, ความหนืด, อุณหภูมิ, ความชื้น, เครื่องแก้ว, Solar power meter, Flow meter, Gloss meter, Master ball
| Electrical calibration laboratory capability |
| Description | Range | Method |
|
Multimeter (Digital/Analog) |
0-1,000 V/0-30 A/0-100 MΩ |
Comparison with Product calibrator |
| AC/DC Power supply |
0 - 1,000 Volt/0 -30 A |
Comparison with Precision multimeter |
| Clamp meter (Digital/Analog) |
All range (Max.500 A) |
Comparison with Product calibrator & turn coil |
|
Process calibrator |
All range | Comparison with Product calibrator |
| Curent transmitter |
4-20 mA/1-5 V/0-10 V |
Comparison with Process calibrator |
| Voltage transmitter |
4-20 mA/1-5 V/0-10 V |
Comparison with Process calibrator |
| Withstanding voltage tester |
20 kV (AC/DC) |
Comparison with High voltage meter |
| Tachometer |
0 - 99,999 rpm |
Comparison with Process calibrator |
| Stop watch |
0 - 60 minite |
Comparison with Universal counter |
| Stroboscope |
0 - 99,999 rpm |
Comparison with standard tachometer |
| Oscilloscope/Oscillator |
Bandwidth 0 to 600 MHz |
Comparison with Product calibrator |
|
Signal generator |
0 - 1 GHz |
Comparison with Signal generator universal |
| Function generator |
0 - 1 GHz |
Comparison with Signal generator universal |
| Synthesizer generator |
0 - 1 GHz |
Comparison with Signal generator universal |
| LCR meter |
10H/10mF/10GΩ |
Comparison with Standard LCR decade |
| mΩ Hi-tester |
1 mΩ - 10 GΩ |
Comparison with High voltage resistor |
| System tester |
1 mΩ - 10 GΩ |
Comparison with High voltage resistor |
| Frequency counter |
0 - 1 GHz |
Comparison with Signal generator |
| Universal counter |
0 - 1 GHz |
Comparison with Signal generator |
| High voltage tester |
20 kV (AC/DC) |
Comparison with High voltage meter |
| Insulation tester |
1 mΩ - 10 GΩ |
Comparison with High voltage resistor |
| Earth ground tester |
1 mΩ - 10 GΩ |
Comparison with High voltage resistor |
| High ohm tester |
1 mΩ - 10 GΩ |
Comparison with High voltage resistor |
| Wrist strap-footware tester |
1 mΩ - 10 GΩ |
Comparison with High voltage resistor |
| Recorder/Data logger |
1 kV/30 A/10 kW |
Comparison with Product calibrator |
| Power meter |
1 kV/30 A/10 kW |
Comparison with Product calibrator |
| Watt meter |
0 - 10 kW |
Comparison with Product calibrator |
| Sound level meter |
94 dB, 114 dB |
Comparison with Sound calibrator |
| |
| Temperature & Humidity calibration laboratory capability |
| Description | Range | Method |
| Thermocouple sensor (Type J,K,E,N,T) | -90 - 1200 oC | ASTM E230 - 2006 |
| RTD sensor (PT100) 2,3,4 Wire | -90 - 650 oC | ASTM E1137 - 2000 |
| Digital thermometer (Simulate) | -200 - 1750 oC | EA 10/11 |
| Temperature controller (Simulate) | -200 - 1750 oC | EA 10/11 |
| Digital thermometer & TC Probe | -90 - 1200 oC | Comparison with Thermometer standard (IPRT) |
| Temperature controller & TC Probe | -90 - 1200 oC | Comparison with Thermometer standard (IPRT) |
| Digital thermometer & RTD Probe | -90 - 650 oC | Comparison with Thermometer standard (IPRT) |
| Temperature controller & RTD Probe | -90 - 650 oC | Comparison with Thermometer standard (IPRT) |
| Temperature recorder | -90 - 1200 oC | Comparison with Thermometer standard (IPRT) |
| Temperature transmitter | -90 - 1200 oC | Comparison with Process calibrator |
| Glass tube thermometer | -40 - 200 oC | ASTM E77-1998 |
| Dial thermometer | -90 - 1200 oC | Comparison with Thermometer standard (IPRT) |
| Data logger | -90 - 1200 oC | Comparison with Thermometer standard (IPRT) |
| Water bath | 20 - 100 oC | ASTM E715-2001 |
| Auto clave | 110 - 125 oC | BS 2646 : 1993 Part 3 |
| Oven | 35 - 250 oC | TLAS G-20 |
| Incubator | 30 - 100 oC | TLAS G-20 |
| Freezer | -90 - 0 oC | TLAS G-20 |
| Refrigerator | 0 - 10 oC | TLAS G-20 |
| Furnace | 300 - 1200 oC | BS 4309 : 1968 |
| Liquid bath / Oil bath | -90 - 250 oC | ASTM E715-2001 |
| Infrared thermometer | -35 - 550 oC | Comparison with Thermometer standard (IPRT) |
| Dry block calibrator | -90 - 1200 oC | EURAMET CG-13/V.1 |
| Digital thermometer & PRT Probe | -90 - 650 oC | Comparison with Thermometer standard (IPRT) |
| Dial thermo-hygrometer | -40-150 oC / 20-98 %RH. | Comparison with Standard Temp - Humidity |
| Digital thermo-hygrometer | -40-150 oC / 20-98 %RH. | Comparison with Standard Temp - Humidity |
| Thermo-hygro meter | -40-150 oC / 20-98 %RH. | Comparison with Standard Temp - Humidity |
| Thermo-hygrograph | -40-150 oC / 20-98 %RH. | Comparison with Standard Temp - Humidity |
| Pressure & Vacuum calibration laboratory capability |
| Description | Range | Method |
| Pressure gauge (Digital/Analog) | 0 - 1,000 bar | DKD R6-1 |
| Vacuum gauge (Digital/Analog) | -1 - 0 bar | DKD R6-1 |
| Compound gauge (Digital/Analog) | -1 - 1,000 bar | DKD R6-1 |
| Perani vacuum gauge | 1 mtorr - 750 torr | DKD R6-1 |
| Manometer | All range | DKD R6-1 |
| Pressure indicator | 0 - 1,000 bar | DKD R6-1 |
| Vacuum indicator | -1 - 0 bar | DKD R6-1 |
| Absolute gague | 0 - 1,000 bar | DKD R6-1 |
| Pressure recorder | -1 - 1,000 bar | DKD R6-1 |
| Test gauge | -1 - 1,000 bar | DKD R6-1 |
| Pressure transmitter | -1 - 1,000 bar | DKD R6-1 |
| Pressure transducer | -1 - 1,000 bar | DKD R6-1 |
| Pressure calibrator | -1 - 1,000 bar | DKD R6-1 |
| Presure switch | -1 - 1,000 bar | DKD R6-1 |
| Pressure controller | -1 - 1,000 bar | DKD R6-1 |
| Air leak tester | -1 - 1,000 bar | DKD R6-1 |
| Pressure module | -1 - 1,000 bar | DKD R6-1 |
